Views: 270 Author: Site Editor Publish Time: 2026-11-20 Origin: Site
Content Menu
>> Best Cheeses for a Cheese Plane
● Position the Cheese Correctly
>> Place the Block on Its Side
>> Use the Shorter Side for Smaller Slices
● Hold the Cheese Plane Correctly
>> Keep Fingers Away From the Slot
● Use a Cheese Plane on a Cheese Board
● Use a Cheese Plane for Cooking
>> Garnishes
● A Simple Routine for Perfect Slices
>> What is the difference between a cheese plane and a cheese knife?
>> Which cheeses work best with a cheese plane?
>> Can I use a cheese plane on Brie?
>> How do I make thinner slices?
>> Is a cheese plane safe to use?
To use a cheese plane properly, place a firm or semi-firm cheese on a stable surface, position the plane at a slight angle, and draw it smoothly across the cheese in one controlled motion. The blade inside the plane's slot shaves off a thin, even slice that rests on the tool, making it easy to transfer to a plate or cheese board.

A cheese plane is a handheld tool designed to shave thin, uniform slices from firm cheeses. It usually has a broad, flat metal head, an angled cutting slot, and a handle that lets you guide the tool across the cheese with control.
Unlike a knife, which cuts downward through a cheese, a cheese plane removes a thin layer from the surface. The slice travels through the slot and rests on top of the plane, where you can lift it away cleanly.
This simple design makes the cheese plane especially useful for sandwiches, salads, pasta, crackers, and cheese boards. It produces consistent slices without requiring advanced knife skills.
A cheese plane works best when the cheese is firm enough to hold its shape but soft enough to slice smoothly. If the cheese is too soft, it may stick to the plane, gather in the slot, or tear instead of forming a clean slice.
If the cheese is too hard, the blade may catch, skip, or break the cheese into uneven pieces. In that case, use a sturdy hard-cheese knife or a grater instead.
A cheese plane performs well with smooth, semi-firm, and firm cheeses, including:
- Gouda
- Edam
- Havarti
- Swiss cheese
- Emmental
- Jarlsberg
- Medium cheddar
- Fontina
- Manchego
- Gruyère
These cheeses can produce broad, flexible slices that work well on sandwiches, toast, salads, and cheese boards.
Avoid using a cheese plane on very soft cheeses such as Brie, Camembert, fresh goat cheese, or triple-cream cheese. Their creamy texture can clog the slot and make clean slicing difficult.
Also avoid using a plane on extremely hard, crystalline cheeses such as aged Parmigiano-Reggiano. The blade may not move smoothly through the dense texture, and forcing it can damage the cheese or the tool.
Preparation is the first step toward clean, safe, and attractive slices. A stable surface, a clean tool, and properly positioned cheese make the process easier.
Place the cheese on a clean, stable, food-safe cutting board or cheese board. A non-slip surface prevents the cheese from shifting while you draw the plane across it.
If your board slides on the counter, place a damp cloth or non-slip mat underneath it. This simple step improves safety and gives you more control.
Make sure the plane is clean and dry before use. Remove any old cheese residue from the slot, because buildup can interfere with the cutting edge and make slices tear or stick.
A clean blade moves more smoothly and produces a more consistent slice.
Very cold cheese can be stiff and difficult to slice. Allowing semi-firm cheese to sit briefly at room temperature can make it easier to work with and improve its flavor.
Do not leave cheese out for too long, especially in a warm kitchen. Remove only the amount you plan to serve and return the rest to the refrigerator.
How you position the cheese affects the length, width, and shape of each slice.
For long, broad slices, place a rectangular block of cheese on its longer side. Position the plane at the top flat edge and draw it downward across the surface.
This technique works especially well for cheddar, Swiss, and Emmental, producing slices suitable for sandwiches or crackers.
For shorter slices, place the block on its shorter side. This gives you more control over the width and makes it easier to create smaller portions for a cheese board.
For a wedge, place the flat cut side down on the board. Hold the cheese steady from the side or use a cheese fork, keeping your fingers well away from the path of the plane.
Do not hold a wedge in one hand while forcing the plane through it with the other. A stable surface is safer and produces better results.
A proper grip gives you control over angle, pressure, and direction. The goal is to guide the plane smoothly rather than force it through the cheese.
Hold the handle firmly but not tightly. Your wrist should remain relaxed so the plane can move in a smooth, continuous motion.
A tight grip often leads to excessive pressure, which can cause the blade to dig into the cheese or create uneven slices.
Keep your fingers away from the cutting slot and the sharp edge. If your cheese plane has a protective cover, use it according to the manufacturer's instructions and keep your thumb on the cover only if that is how the tool is designed to be used.
Always direct the blade away from your supporting hand. If you need to steady the cheese, use a cheese fork or position your hand well behind the cutting path.
Place the flat head of the plane against the cheese at a slight angle. The angle helps the blade enter the surface and allows the slice to form inside the slot.
A steeper angle may produce a thicker slice, while a shallower angle can create a thinner one. Adjust gradually until you find the thickness that works best for your cheese and purpose.
The first slice sets the tone for the rest of the cheese. Begin with a clean, flat surface and use a controlled motion.
Choose a flat, even edge of the cheese. Avoid starting on a rounded, crumbly, or irregular surface, which can make the plane skip or produce an uneven slice.
If the cheese has a thick rind, trim or score it first with an appropriate knife. This gives the plane a smooth starting surface.
Place the plane on the top of the cheese and draw it toward you in one smooth motion. The cutting edge inside the slot removes a thin layer, and the slice emerges through the opening.
Do not saw back and forth. A single, continuous pull usually produces a cleaner slice than repeated strokes.
Stop just before you reach the far edge of the cheese. This prevents the plane from slipping off the block and helps maintain control.
Lift the slice from the plane and place it on a plate, sandwich, salad, or cheese board.
Thickness is controlled by three factors: the slot width, the angle of the plane, and the pressure you apply.
Apply steady, even pressure rather than forcing the plane downward. Too little pressure may cause the blade to skip across the surface, while too much pressure can dig into the cheese and create a thick or uneven section.
Let the tool do the work. A smooth pulling motion is more effective than pushing hard.
If your slices are too thick, reduce the angle slightly. If they are too thin or tear easily, increase the angle slightly and make sure the cheese is firm enough.
Small adjustments make a noticeable difference. Practice on the least visible edge of the cheese before cutting slices for serving.
For most sandwiches and cheese boards, aim for slices that are thin enough to fold or layer easily but thick enough to provide flavor and texture. Even slices around three to five millimeters can create a balanced presentation.
Thin slices work well for delicate sandwiches and garnishes, while slightly thicker slices are better for melting on toast or layering in a grilled sandwich.
The cheese plane is designed for a pulling motion, not a chopping motion.
Draw the plane across the cheese in one direction. This allows the blade to shave a controlled layer from the surface.
A chopping motion can crush the cheese, damage the blade, or create uneven pieces.
Move at a steady pace. If you pause halfway through the slice, the blade may catch or leave a ridge in the cheese.
A smooth, confident motion produces the cleanest result.
Whenever possible, slice with the natural grain of the cheese. This reduces crumbling and helps the slice hold together.
If the cheese begins to crumble, reduce pressure, adjust the angle, or use a different tool.
A cheese plane is especially useful when you want to create an attractive, easy-to-serve cheese board.
For a decorative presentation, use a gentle pulling motion to create thin curls or ribbons of cheese. These can be arranged across the board to add height and visual interest.
Thin slices make it easy for guests to take a small amount without cutting into a large wedge. This keeps the board tidy and helps the cheese stay fresh longer.
Arrange cheese slices near crackers, bread, fruit, nuts, honey, or cured meats. Keep the plane nearby only if guests will use it, and make sure the handle is accessible without requiring anyone to reach across other foods.
A cheese plane is not only for serving. It is also useful in everyday cooking.
Use thin, even slices for sandwiches, grilled cheese, toast, and burgers. The slices lie flat, melt more evenly, and are easier to bite through than thick chunks.
Shave thin slices over salads, grain bowls, roasted vegetables, or pasta. The cheese adds flavor without overwhelming the dish.
Use the plane to create delicate shavings for garnishing soups, risotto, baked dishes, or vegetable plates. Thin shavings distribute flavor evenly and look elegant.
Proper cleaning keeps the blade sharp and prevents cheese residue from hardening in the slot.
Rinse the plane soon after use with warm water and mild dish soap. Remove any cheese from the slot with a soft brush or cloth.
Do not let cheese dry inside the slot, because it becomes harder to remove and can affect future slices.
Dry the plane thoroughly after washing. This protects the metal from corrosion and keeps wooden handles in good condition.
Store the plane in a drawer organizer, blade guard, or original packaging. Keeping the blade protected reduces the risk of accidental cuts and preserves the edge.
- Using a cheese plane on very soft cheese, which can smear or clog the slot.
- Using it on extremely hard cheese, which can cause the blade to catch or skip.
- Pressing too hard, which produces thick or uneven slices.
- Using too little pressure, which can cause the blade to skip over the surface.
- Holding the cheese in one hand while cutting with the other.
- Sawing back and forth instead of using one smooth pulling motion.
- Starting on an uneven or crumbly surface.
- Leaving cheese residue in the slot after use.
1. Choose a semi-firm or firm cheese.
2. Place it on a stable cutting board.
3. Let it temper briefly if needed.
4. Position the cheese with a flat surface facing upward.
5. Hold the plane at a slight angle.
6. Draw it smoothly toward you with even pressure.
7. Stop before the edge of the cheese.
8. Lift the slice from the plane and serve it immediately.
9. Clean the slot and dry the tool after use.

A cheese plane shaves thin, even slices by being drawn across the surface of the cheese. A cheese knife cuts downward to create slices, wedges, or portions.
Semi-firm and firm cheeses such as Gouda, Edam, Havarti, Swiss, Emmental, Manchego, Gruyère, and medium cheddar work best. These cheeses are firm enough to slice cleanly but not so hard that they resist the blade.
No. Brie is usually too soft and creamy for a cheese plane. It can stick to the tool, gather in the slot, or tear rather than form a clean slice. Use a soft-cheese knife instead.
Use a shallower angle and lighter, even pressure. Make sure the cheese is firm enough and the blade is clean, because a dull or dirty edge can cause tearing.
Yes, when used on a stable surface with fingers kept away from the cutting slot. Always direct the blade away from your body and follow the manufacturer's safety instructions.
Bread Knife Uses: 8 Practical Tasks And How To Choose The Right Blade
From First Inquiry To A Successful Cheese Knife Order with A Germany Customer
How Manufacturers Can Make A Cheese Knife More Dishwasher-Friendly
Custom Hollow Handle Cheese Knife: A Complete Guide for Brands, Retailers, And Gift Buyers
Butcher Knife Sets Vs. Cleavers: What Is The Real Difference in A Commercial Kitchen?